COB LED strip 12 V, warm white 3000K, 8 mm
A smooth, dot-free line of warm white light for shelves, signs and enclosures.
Dense chip-on-board strip (320 LEDs/m) that gives a continuous line of light with no visible dots. 12 V, CRI 90, 8 mm wide, cut at marked points. Dim it with a MOSFET and PWM.
Electrical
- Supply voltage
- 11 to 12.6 V
- Talks over
- pwm
Needs alongside it
- Switch or dim it with a logic-level MOSFET (IRLZ44N).
- 12 V supply sized for the length used.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | power in | ||
| - | not connectedTo the MOSFET drain for dimming, or straight to ground for always on. |
Size and material
- Size
- 1 × 0 × 0 m
- Material
- led
- Sold by the
- m
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.