MAX17048 LiPo / Li-ion fuel gauge (I2C)
Tells the project how full its battery is, as a percentage.
Reads a single cell's voltage and state of charge (%) with the ModelGauge algorithm, no shunt resistor. Battery passes through the two JST-PH ports. I2C at 0x36 (3-5 V logic, STEMMA QT), alert/INT output. 25.7 x 20.3 x 7.2 mm.
Electrical
- Supply voltage
- 3 to 5.5 V
- Talks over
- i2c
- I2C address
- 0x36
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 VPower at the board's logic voltage. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| INT | digitalAlert output (low charge, voltage limits). |
Size and material
- Size
- 26 × 7 × 20 mm
- Weight
- 2.6 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.