Strain gauge load cell, 5 kg
Measures weight or force. Paired with an HX711 board it becomes a scale.
Aluminium bar load cell with a full Wheatstone bridge, 4 wires (red E+, black E-, white A-, green A+). About 1 mV/V output, so it must be read through an HX711 amplifier. M4/M5 mounting holes at each end.
Electrical
- Supply voltage
- 3 to 10 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| E+ | not connectedRed. Excitation +, to HX711 E+. | ||
| E- | not connectedBlack. Excitation -, to HX711 E-. | ||
| A- | not connectedWhite. Signal -, to HX711 A-. | ||
| A+ | not connectedGreen. Signal +, to HX711 A+. |
Size and material
- Size
- 75 × 13 × 13 mm
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.