Skip to content

LPS35HW water-resistant pressure sensor

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A pressure sensor that can get wet, for measuring water depth or weather.

ST LPS35HW in a water-resistant gel-filled can: 260-1260 hPa absolute, 24-bit, ±0.1 hPa. The sensor tolerates water (water-depth gauges); the breakout itself does not. I2C at 0x5D (0x5C) or SPI. 3.3-5 V.

Electrical

Supply voltage
3.3 to 5 V
Logic level
3.3 V
Talks over
i2c, spi
I2C address
0x5D, 0x5C

Pins

PinCan doMax VMax mA
VIN3.3 V, 5 V
3Vo3.3 V3.3 V regulator output. Leave unconnected normally.
GNDground
SCKI2C clock, SPI clockI2C SCL or SPI clock.
SDII2C data, SPI MOSII2C SDA or SPI data in.
SDOSPI MISO, digitalSPI data out; in I2C mode selects the address.
CSSPI selectSPI chip select. Leave unconnected for I2C.
INTdigitalInterrupt output.

Size and material

Size
21 × 4 × 14 mm
Weight
1.2 g
Material
pcb
Sold by the
piece

Works with

Projects using it

No public project uses it yet. Design one that does.