MCP9600 I2C thermocouple amplifier
Reads a thermocouple probe, for very hot things like ovens, kilns and smokers.
Microchip MCP9600 reads K, J, T, N, S, E, B and R thermocouples (K: -200 to 1372 °C) with cold-junction compensation, over I2C (0x67 default, 0x60-0x67 via ADDR). Terminal block for the thermocouple. 2.7-5.5 V.
Electrical
- Supply voltage
- 2.7 to 5.5 V
- Talks over
- i2c
- I2C address
- 0x67, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| ADR | not connectedAddress select by resistor. | ||
| A1 | digitalAlert output 1. | ||
| A2 | digitalAlert output 2. | ||
| A3 | digitalAlert output 3. | ||
| A4 | digitalAlert output 4. | ||
| TC+ | not connectedThermocouple + (yellow on type K). | ||
| TC- | not connectedThermocouple - (red on type K). |
Size and material
- Size
- 24 × 3 × 20 mm
- Weight
- 1.7 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.