MG996R metal-gear servo, standard size
A strong servo for steering, lids and arms that need real force.
High-torque digital servo with metal gears, about 180° travel. 9.4 kg·cm at 4.8 V, 11 kg·cm at 6 V. 4.8-7.2 V. 500-900 mA moving and up to 2.5 A stalled, so it needs its own supply. 40.7 x 19.7 x 42.9 mm, 55 g.
Electrical
- Supply voltage
- 4.8 to 7.2 V
- Current
- 700 mA typical, 2500 mA max
- Talks over
- pwm
Needs alongside it
- Power from a battery or supply rated for 2.5 A per servo, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | groundBrown or black wire. | ||
| V+ | 5 V, power inRed wire. | ||
| SIG | PWMOrange, yellow or white wire. 50 Hz, 1-2 ms pulse. 3.3 V signals work. |
Size and material
- Size
- 54 × 43 × 20 mm
- Weight
- 55 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.