Electret microphone + MAX4466 amplifier (adjustable gain)
A sensitive microphone for listening to sound levels and pitch.
Electret mic with a Maxim MAX4466 op-amp; trimmer sets gain 25x-125x. Analog output centred at VCC/2 for FFT, level meters and sampling. 2.4-5 V (use the quietest supply, e.g. 3.3 V).
Electrical
- Supply voltage
- 2.4 to 5.5 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| GND | ground | ||
| OUT | analogAudio centred at VCC/2. |
Size and material
- Size
- 14 × 8 × 22 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.