Electret microphone + MAX9814 auto-gain amplifier
A microphone that adjusts itself, for clap switches and sound-reactive lights.
Electret mic with Maxim MAX9814 automatic gain control (40/50/60 dB by the Gain pin), so loud and quiet sounds both read well. Analog output centred at 1.25 V, 2 Vpp max. 2.7-5.5 V. 26 x 14 mm.
Electrical
- Supply voltage
- 2.7 to 5.5 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vdd | 3.3 V, 5 V | ||
| GND | ground | ||
| Out | analogAudio, 1.25 V DC bias. | ||
| Gain | not connectedOpen 60 dB; to GND 50 dB; to Vdd 40 dB. | ||
| AR | not connectedAttack/release ratio select. |
Size and material
- Size
- 25 × 7 × 14 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.