MiCS-5524 CO, alcohol + VOC gas sensor (analog)
Notices fumes like carbon monoxide or alcohol, for alerts and experiments. Not a certified CO alarm.
SGX MiCS-5524 heated MOX sensor with analog output that rises with CO (1-1000 ppm), ammonia, ethanol, hydrogen and methane. Needs 5 V for its heater (draws tens of mA, warms up for a few minutes). Detects, doesn't identify, the gas. !En pin turns the heater off.
Electrical
- Supply voltage
- 4.9 to 5.1 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 5V | 5 V | ||
| GND | ground | ||
| Ao | analogAnalog output; rises with gas concentration. | ||
| !En | digitalPull HIGH to turn the heater off. |
Size and material
- Size
- 20 × 3 × 13 mm
- Weight
- 0.9 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.