MiniBoost 5 V 1 A boost converter (TPS61023)
Gets 5 V out of one LiPo or two AA batteries for small 5 V parts.
Tiny boost converter: starts from 1.8 V, runs down to 0.5 V, outputs 5.2 V. About 1.1 A out from 3.5 V (a LiPo), 500 mA from two NiMH cells. 0.1 µA shutdown current. 17.8 x 11.3 mm.
Electrical
- Supply voltage
- 1.8 to 5.5 V
- Current
- 500 mA typical, 1400 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery0.5-5.5 V (1.8 V to start). | ||
| GND | ground | ||
| VOUT | not connected5.2 V out. | ||
| EN | digitalPull LOW to shut down. |
Size and material
- Size
- 18 × 6 × 11 mm
- Weight
- 1 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.