NeoPixel ring, 16 RGB LEDs
A circle of color lights, great for clocks, gauges and glowing rings.
16 individually addressable 5050 RGB LEDs (WS2812-class) in a ring, chainable via DOUT. 5 V; about 60 mA per LED at full white. Outer 44.5 mm, inner 31.7 mm, 6.7 mm thick, 3.03 g.
Electrical
- Supply voltage
- 4 to 7 V
- Current
- 320 mA typical, 960 mA max
- Talks over
- digital
Needs alongside it
- Up to 0.96 A at full white: power from a 5 V supply rated for it, add 1000 µF across 5V/GND, and join grounds.
- Data threshold is 0.7 x VDD (3.5 V at 5 V). Short runs often work from 3.3 V; use a 74AHCT125 for reliability.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 5V | 5 V4-7 V; 5 V nominal. | ||
| GND | ground | ||
| DIN | digitalData in. 300-500 Ω series resistor recommended. | ||
| DOUT | not connectedData out to the next NeoPixel in the chain. |
Size and material
- Size
- 45 × 7 × 45 mm
- Weight
- 3.03 g
- Material
- led
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.