PN532 NFC / RFID reader-writer breakout
Reads and writes tap-cards and NFC tags, for door locks, check-ins and games.
NXP PN532 with a tuned 13.56 MHz antenna on a 51 x 118 mm board: reads and writes MIFARE Classic / ISO14443A tags and NFC stickers, and can talk to phones. I2C (7-bit address 0x24), SPI or UART, chosen by the SEL0/SEL1 jumpers. 3.3 V part: 5 V boards need the included 4050 level shifter; I2C needs 1.5 kΩ pull-ups to 3.3 V.
Electrical
- Supply voltage
- 3.3 V
- Current
- 100 mA typical, 150 mA max
- Talks over
- i2c, spi, uart
- I2C address
- 0x24
Needs alongside it
- 3.3 V inputs: on 5 V boards put the 4050 buffer (included) between the board and SCK/MOSI/SSEL.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 3.3V | 3.3 V3.3 V supply. | ||
| GND | ground | ||
| SCK | SPI clock | ||
| MISO | SPI MISO | ||
| MOSI | SPI MOSI | ||
| SSEL | SPI selectSPI chip select. | ||
| SDA | I2C dataNeeds a 1.5 kΩ pull-up to 3.3 V. | ||
| SCL | I2C clockNeeds a 1.5 kΩ pull-up to 3.3 V. | ||
| IRQ | digitalCard-present interrupt. | ||
| RSTO | digitalReset out. |
Size and material
- Size
- 51 × 1 × 118 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.