nRF24L01+ 2.4 GHz transceiver module
A cheap radio so two boards can talk to each other wirelessly across a room or garden.
Nordic nRF24L01+ radio on a small board with PCB antenna: 2.4 GHz ISM band, 125 channels, up to 2 Mbps, SPI. Runs on 1.9-3.6 V only (its SPI pins are 5 V tolerant, its VCC is not). Put a 10-100 µF capacitor across VCC/GND for reliable transmit.
Electrical
- Supply voltage
- 1.9 to 3.6 V
- Talks over
- spi
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | ground | ||
| VCC | 3.3 V3.3 V only. Never 5 V. | ||
| CE | digitalChip enable (TX/RX mode). | ||
| CSN | SPI select | ||
| SCK | SPI clock | ||
| MOSI | SPI MOSI | ||
| MISO | SPI MISO | ||
| IRQ | digitalInterrupt, active LOW. Optional. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.