nRF24L01+ PA/LNA long-range module with SMA antenna
A long-range version of the 2.4 GHz radio, for remote controls and sensors far apart.
nRF24L01+ with power amplifier, low-noise amplifier and SMA antenna for much longer range (seller states up to about 1100 m line of sight). Same 8-pin SPI pinout as the basic module; 41 x 15.5 mm board. 3.3 V only and draws far more current when transmitting: give it its own 3.3 V regulator and a capacitor.
Electrical
- Supply voltage
- 1.9 to 3.6 V
- Talks over
- spi
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | ground | ||
| VCC | 3.3 V3.3 V only, from a regulator with headroom; add 10-100 µF. | ||
| CE | digital | ||
| CSN | SPI select | ||
| SCK | SPI clock | ||
| MOSI | SPI MOSI | ||
| MISO | SPI MISO | ||
| IRQ | digitalOptional. |
Size and material
- Size
- 41 × 5 × 16 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.