SH1107 1.12" OLED, 128x128, I2C or SPI
A sharp square screen for icons, gauges and short messages.
Square 128x128 monochrome OLED on an Adafruit breakout (SH1107 driver) with regulator, boost and level shifting. I2C at 0x3D (0x3C with the A0 jumper) or SPI. 3-5 V. 20 x 20 mm active area.
Electrical
- Supply voltage
- 3 to 5.5 V
- Logic level
- 3.3 V
- Talks over
- i2c, spi
- I2C address
- 0x3D, 0x3C
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vin | 3.3 V, 5 V | ||
| 3Vo | 3.3 VRegulator output. Leave unconnected. | ||
| GND | ground | ||
| Clk | I2C clock, SPI clockI2C SCL or SPI clock. | ||
| Data | I2C data, SPI MOSII2C SDA or SPI data. | ||
| CS | SPI selectSPI only. | ||
| DC | digitalSPI only. | ||
| Rst | digital |
Size and material
- Size
- 41 × 6 × 31 mm
- Weight
- 6.4 g
- Material
- screen
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.