SSD1306 0.91" OLED, 128x32, I2C (STEMMA QT)
A slim little screen for one or two lines of text, like a status bar.
Small monochrome 128x32 OLED on an Adafruit breakout with regulator and auto-reset. I2C at 0x3C. 3-5 V; about 20 mA with typical content. Pixels dim after ~1000 h fully lit.
Electrical
- Supply voltage
- 3 to 5.5 V
- Logic level
- 3.3 V
- Current
- 20 mA typical, 30 mA max
- Talks over
- i2c
- I2C address
- 0x3C
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| RST | digitalOptional; auto-reset is built in. |
Size and material
- Size
- 35 × 4 × 20 mm
- Material
- screen
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.