Gravity analog pH sensor kit V2
Measures how acidic or alkaline water is, for hydroponics, pools and aquariums.
DFRobot SEN0161-V2: pH 0-14 electrode (BNC, 1 m cable) and signal board, ±0.1 pH at 25 °C after two-point calibration, analog 0-3.0 V. 3.3-5.5 V. Electrodes wear out and need buffer-solution calibration. Board 42 x 32 mm.
Electrical
- Supply voltage
- 3.3 to 5.5 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | 3.3 V, 5 V | ||
| - | ground | ||
| A | analog0-3.0 V. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.