T-slot photo interrupter (5-24 V, open collector)
Notices when a flag or tab passes through its slot, like a precise end stop.
Industrial slot sensor with a 5 mm gap: output changes when something passes through the slot (encoder discs, end stops, counting). Logic powered from 5-24 V, 35 mA max; open-collector output sinks up to 100 mA.
Electrical
- Supply voltage
- 5 to 24 V
- Current
- 20 mA typical, 35 mA max
- Talks over
- digital
Needs alongside it
- Pull OUT up to the board's logic voltage (INPUT_PULLUP works).
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | 5 V, power in5-24 V. | ||
| - | ground | ||
| OUT | digitalOpen collector: pull up to the board's logic voltage. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.