Pololu mini pushbutton power switch, LV (2.2-20 V, 6 A)
A push-on, push-off power switch the project can also turn off by itself.
MOSFET soft power switch with reverse-voltage protection: press the on-board button (or one wired to A/B) to toggle power from VIN to VOUT. ON/OFF/CTRL inputs let a board turn itself off. 2.2-20 V, 6 A. 0.6 x 0.7 in.
Electrical
- Supply voltage
- 2.2 to 20 V
- Current
- 1000 mA typical, 6000 mA max
- Talks over
- power, digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, batteryFrom the battery. | ||
| GND | ground | ||
| VOUT | not connectedSwitched output to the project. | ||
| A | not connectedExternal pushbutton contact. | ||
| B | not connectedExternal pushbutton contact. | ||
| ON | digitalA high pulse (>1 V) turns the switch on. | ||
| OFF | digitalA high pulse turns it off (self power-down). | ||
| CTRL | digitalDirectly sets the switch state. |
Size and material
- Size
- 15 × 3 × 18 mm
- Weight
- 0.6 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.