Potentiometer 10 kΩ, linear, panel mount
A knob you turn to set a value, like volume or speed.
ECC R1210N-2B1-B10K: 13 mm body, 300° travel, linear (B) taper, 0.05 W. Outer legs to GND and VCC, middle leg (wiper) to an analog pin. M7 x 0.75 bushing mounts in a 7 mm hole; 6 mm knurled shaft. Legs on a 4 mm pitch. 20 V DC max.
Electrical
- Supply voltage
- 0 to 20 V
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 VOuter leg. Swap outer legs to reverse the direction. | ||
| WIPER | analogMiddle leg, to an analog pin. | ||
| GND | groundOther outer leg. |
Size and material
- Size
- 13 × 25 × 18 mm
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
