PowerBoost 1000 Basic: 5 V boost from 1.8 V+
Turns a battery into a strong, steady 5 V for a Raspberry Pi, servos or LEDs.
TPS61030 boost converter to 5.2 V: 1 A+ from 1.8 V, 1.5 A from 2 AA/NiMH, 2 A from a LiPo or 3 cells. Low-battery LED/LBO pin at 3.2 V, EN pin, 20 µA when disabled. No charger (see the PowerBoost 1000C). 29 x 23 x 2 mm (7.5 mm tall with the JST jack).
Electrical
- Supply voltage
- 1.8 to 5.2 V
- Current
- 1000 mA typical, 2000 mA max
- Talks over
- power, digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| BAT | power in, batteryBattery in (also the JST-PH jack). | ||
| 5V | not connected5.2 V boosted output. | ||
| EN | digitalPull LOW to turn the boost off. | ||
| LBO | digitalGoes LOW below 3.2 V battery. | ||
| GND | ground |
Size and material
- Size
- 29 × 8 × 23 mm
- Weight
- 6 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.