Tactile push button, 12 mm
A button you press. It's on only while you hold it.
12 x 12 mm momentary tactile switch, 6 mm tall, 4 legs (pairs joined internally). Rated 12 V 50 mA. Normally open.
Electrical
- Supply voltage
- 0 to 12 V
- Talks over
- digital
Needs alongside it
- Use the board's internal pull-up (INPUT_PULLUP). Pressed reads LOW.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | digitalTo a GPIO. | ||
| 2 | digital, groundTo GND. |
Size and material
- Size
- 12 × 6 × 12 mm
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.