Pololu 5 V 1 A step-down regulator (D24V10F5)
Turns a battery or supply voltage into a steady 5 V.
Synchronous buck regulator: 5.1-36 V in, fixed 5 V out, up to 1 A, 0.2 mA max quiescent. No reverse-voltage protection. SHDN pin turns it off. 0.5 x 0.7 in.
Electrical
- Supply voltage
- 5.1 to 36 V
- Current
- 500 mA typical, 1000 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery5.1-36 V in. | ||
| GND | ground | ||
| VOUT | not connectedRegulated 5 V out, up to 1 A. | ||
| SHDN | digitalPull LOW to turn the output off. |
Size and material
- Size
- 13 × 4 × 18 mm
- Weight
- 1 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.