Pololu 5 V 2.5 A step-down regulator (D24V22F5)
Turns a battery or supply voltage into a steady 5 V.
Synchronous buck regulator: 5.3-36 V in, fixed 5 V out, about 2.2 A continuous at 24 V in (2.5 A peak), reverse-voltage protected, 3 mA max quiescent. EN pin (pulled up) for low-power off. 0.7 x 0.7 in.
Electrical
- Supply voltage
- 5.3 to 36 V
- Current
- 1250 mA typical, 2500 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery5.3-36 V in. | ||
| GND | ground | ||
| VOUT | not connectedRegulated 5 V out, up to 2.5 A. | ||
| EN | digitalPulled up to VIN on the board; pull LOW to turn off. |
Size and material
- Size
- 18 × 8 × 18 mm
- Weight
- 2.3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.