Pololu 5 V 5 A step-down regulator (D24V50F5)
Turns a battery or supply voltage into a steady 5 V.
High-current synchronous buck regulator: 6-38 V in, fixed 5 V out, 5 A continuous, reverse-voltage protected, 0.8 mA max quiescent. Powers a Raspberry Pi 5 or many servos from 12-24 V. 0.7 x 0.8 in.
Electrical
- Supply voltage
- 6 to 38 V
- Current
- 2500 mA typical, 5000 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery6-38 V in. | ||
| GND | ground | ||
| VOUT | not connectedRegulated 5 V out, up to 5 A. |
Size and material
- Size
- 18 × 9 × 20 mm
- Weight
- 3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.