Pololu 3.3 V step-up/step-down regulator (S7V8F3)
Turns a battery or supply voltage into a steady 3.3 V for boards and sensors.
Buck-boost regulator: 2.7-11.8 V in, fixed 3.3 V out above or below the input, up to 1 A, 0.1 mA max quiescent. Keeps a 3.3 V board steady over a LiPo's whole discharge curve. No reverse protection. 0.45 x 0.65 in.
Electrical
- Supply voltage
- 2.7 to 11.8 V
- Current
- 500 mA typical, 1000 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery2.7-11.8 V in. | ||
| GND | ground | ||
| VOUT | not connectedRegulated 3.3 V out, up to 1 A. |
Size and material
- Size
- 11 × 3 × 17 mm
- Weight
- 0.6 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.