Pololu 5 V step-up regulator (U3V16F5)
Turns a battery or supply voltage into a steady 5 V.
Compact boost regulator: 1.3-16 V in (must be below 5 V for regulation), fixed 5 V out, up to 2 A input current. Turns 1-3 AA cells or a LiPo into 5 V. No reverse protection. 0.32 x 0.52 in.
Electrical
- Supply voltage
- 1.3 to 5 V
- Current
- 500 mA typical, 1000 mA max
- Talks over
- power
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power in, battery1.3-5 V in. | ||
| GND | ground | ||
| VOUT | not connectedRegulated 5 V out, up to 1 A. |
Size and material
- Size
- 8 × 3 × 13 mm
- Weight
- 0.4 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.