Skip to content

STEMMA mini relay, 1 channel, 3-5 V (Adafruit 4409)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

A small electric switch your board can flip to turn a pump, light or fan on and off, plugged in with one cable.

Adafruit STEMMA Non-Latching Mini Relay: Nexem EE2 relay with transistor driver, flyback diode and LED. Runs from 3-5 V power and 3-5 V logic. Contacts 2 A resistive at 30 VDC (0.6 A at 110 VDC, 0.5 A at 120 VAC, 0.3 A at 250 VAC). Coil draws about 50 mA from Vin. JST-PH 3-pin input; push-in terminal block for COM, NO and NC.

Electrical

Supply voltage
3 to 5 V
Current
50 mA typical, 50 mA max
Talks over
digital

Pins

PinCan doMax VMax mA
GNDgroundSTEMMA black wire: power and signal ground.
Vin3.3 V, 5 VSTEMMA red wire: 3-5 V DC, powers the coil driver (about 50 mA while on).
SigdigitalSTEMMA white wire: 3-5 V logic. High switches COM to NO.
COMnot connectedSwitch common (push-in terminal, 24-18 AWG).
NOnot connectedClosed to COM while Sig is high (push-in terminal).
NCnot connectedClosed to COM while Sig is low (push-in terminal).

Size and material

Size
34 × 11 × 22 mm
Material
pcb
Sold by the
piece

Works with

Projects using it