RS-232 level shifter, 2 channels (MAX3232E)
Lets the project talk to older equipment with a classic serial (RS-232) port.
Converts a 3-5 V UART to true RS-232 voltages (and back) for old instruments, scales, GPS units and industrial gear. Two transmit + two receive channels, ±15 kV ESD protection, 3-5.5 V supply, ~300 µA.
Electrical
- Supply voltage
- 3 to 5.5 V
- Current
- 0.3 mA typical, 1 mA max
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 VSame as the board's logic voltage. | ||
| GND | ground | ||
| T1 | serial RXLogic in from the board's TX. | ||
| R1 | serial TXLogic out to the board's RX. | ||
| T2 | serial RXSecond channel, logic in. | ||
| R2 | serial TXSecond channel, logic out. | ||
| T1OUT | not connectedRS-232 line out (labelled T1 on the RS-232 side). | ||
| R1IN | not connectedRS-232 line in (labelled R1 on the RS-232 side). | ||
| T2OUT | not connectedSecond channel RS-232 out. | ||
| R2IN | not connectedSecond channel RS-232 in. | ||
| V+ | not connectedPositive RS-232 rail reference. | ||
| V- | not connectedNegative RS-232 rail reference. |
Size and material
- Size
- 20 × 3 × 18 mm
- Weight
- 1.3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.