SCD-40 true CO2 sensor (+ temperature, humidity)
Measures real carbon dioxide in a room, to know when to open a window.
Sensirion SCD-40 photoacoustic NDIR CO2 sensor: 400-2000 ppm, ±(50 ppm + 5 %), plus temperature and humidity. I2C at 0x62. 3.3-5 V; 17 mA average at a 5 s rate, 0.5 mA in low-power mode. Needs a quiet supply.
Electrical
- Supply voltage
- 3.3 to 5 V
- Logic level
- 3.3 V
- Current
- 17 mA typical, 205 mA max
- Talks over
- i2c
- I2C address
- 0x62
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V3-5 V. Use the board's logic voltage. | ||
| 3Vo | 3.3 V3.3 V regulator output. Leave unconnected normally. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data |
Size and material
- Size
- 26 × 8 × 23 mm
- Weight
- 2.8 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.