Digital servo 20 kg, metal gear, 270°
A very strong servo that turns three-quarters of a circle, for steering and heavy arms.
Standard-size digital servo with aluminum gears and dual ball bearings: up to 22.8 kg·cm at 6.8 V, 270° range over a 500-2500 µs pulse (1166 µs = 90°, 1833 µs = 180°). Overload and 70 °C over-temperature protection. 56 g. Needs its own supply: stall current is several amps.
Electrical
- Supply voltage
- 6.8 V
- Talks over
- pwm
Needs alongside it
- Power from a supply rated for a 6-7.4 V, 3 A+ servo supply, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | groundBrown or black wire. | ||
| V+ | 5 V, power inRed wire. | ||
| SIG | PWMOrange, yellow or white wire. 500-2500 µs pulse for 0-270°. |
Size and material
- Size
- 40 × 45 × 20 mm
- Weight
- 56 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.