Analog feedback micro servo, metal gear
A servo that can report where it actually is, so you can teach it a movement by hand.
Metal-gear micro servo with an extra wire from its internal potentiometer, so the board can read the real horn position (and record poses by moving it by hand). 1.8 kg·cm and 0.1 s per 60° at 6 V. Body 11.58 x 22.75 x 29.19 mm (32.74 mm across tabs), 15.8 g.
Electrical
- Supply voltage
- 4.8 to 6 V
- Talks over
- pwm, analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | groundBrown or black wire. | ||
| V+ | 5 V, power inRed wire. | ||
| SIG | PWMOrange, yellow or white wire. 50 Hz, 1-2 ms pulse. 3.3 V signals work. | ||
| FB | analogFeedback wire: potentiometer voltage, read with an analog pin. |
Size and material
- Size
- 33 × 31 × 12 mm
- Weight
- 15.81 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.