SGP30 air quality sensor (TVOC + eCO2)
Senses smells and stuffy air from things like paint, cooking and people.
Sensirion SGP30 heated metal-oxide gas sensor reporting TVOC (0-60,000 ppb) and equivalent CO2 (400-60,000 ppm), with on-chip baseline tracking. I2C at 0x58. 3.3-5 V. Estimates CO2 from VOCs; not a true CO2 sensor.
Electrical
- Supply voltage
- 3.3 to 5 V
- Logic level
- 3.3 V
- Talks over
- i2c
- I2C address
- 0x58
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| 1V8 | not connected1.8 V regulator output. Leave unconnected. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data |
Size and material
- Size
- 26 × 5 × 18 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.