Capacitive soil moisture sensor v1.2
Tells how wet the soil is. It reads a higher number when the soil is dry.
Corrosion-resistant capacitive probe (TLC555 oscillator + 3.3 V regulator). Analog output roughly 0-3.0 V: higher in dry soil, lower in wet soil. 3.3-5.5 V, about 5 mA. Electronics at the top must stay dry.
Electrical
- Supply voltage
- 3.3 to 5.5 V
- Current
- 5 mA typical, 6 mA max
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| AOUT | analog0-3.0 V. Calibrate dry/wet values per soil. | ||
| VCC | 3.3 V, 5 V | ||
| GND | ground |
Size and material
- Size
- 23 × 10 × 98 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
