Skip to content

I2C 8-channel solenoid driver (MCP23017)

Report component

Tell our team what needs attention. You must be signed in to send a report.

Up to 2,000 characters. Include what the team should check.

Switches up to eight solenoids or valves from two board pins.

Adafruit board with an MCP23017 I/O expander and 8 MOSFET outputs with flyback protection for solenoids, valves and motors, controlled over I2C (address 0x20, 0x20-0x27 by jumpers). Solenoid power on the centre terminal blocks; 3 V or 5 V logic. Port B is broken out for extra I/O. 51 x 28 x 10.2 mm, 10.7 g.

Electrical

Supply voltage
3 to 5.5 V
Talks over
i2c
I2C address
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27

Pins

PinCan doMax VMax mA
VIN3.3 V, 5 VLogic supply.
GNDground
SCLI2C clock
SDAI2C data
V+power inSolenoid supply (terminal block).
OUT1not connectedLow-side output 1: solenoid between V+ and here.
OUT2not connectedLow-side output 2: solenoid between V+ and here.
OUT3not connectedLow-side output 3: solenoid between V+ and here.
OUT4not connectedLow-side output 4: solenoid between V+ and here.
OUT5not connectedLow-side output 5: solenoid between V+ and here.
OUT6not connectedLow-side output 6: solenoid between V+ and here.
OUT7not connectedLow-side output 7: solenoid between V+ and here.
OUT8not connectedLow-side output 8: solenoid between V+ and here.

Size and material

Size
51 × 10 × 28 mm
Weight
10.7 g
Material
pcb
Sold by the
piece

Works with

Projects using it

No public project uses it yet. Design one that does.