Solid-state relay SSR-40DA (3-32 VDC in, 24-380 VAC out, 40 A)
A silent electronic switch for mains-powered things like heaters, controlled by the board.
Silent solid-state relay switching AC loads from a 3-32 V DC control signal (a 3.3 V GPIO works). Output 24-380 VAC, 40 A rating, needs a heatsink above a few amps, and only switches AC (not DC). Mains wiring must be done and checked by a qualified person.
- Works with mains electricity. Designs using it get a safety review before we build them.
Electrical
- Supply voltage
- 3 to 32 V
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 3+ | digitalControl input +, 3-32 V DC (from a GPIO). | ||
| 4- | groundControl input -. | ||
| 1 | not connectedAC load terminal. | ||
| 2 | not connectedAC load terminal. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.