28BYJ-48 5 V stepper motor + ULN2003 driver board
A slow motor that moves in tiny exact steps, for dials, blinds and turntables.
Geared unipolar stepper (about 2048 steps per output turn with the common 1:64 gearbox, ~15 rpm max) plus its ULN2003 Darlington driver board with LEDs. 5 V, about 240 mA with two coils on. Slow but precise and holds position. 28 mm diameter body, 5 mm flatted shaft.
Electrical
- Supply voltage
- 5 to 5.5 V
- Current
- 240 mA typical, 300 mA max
- Talks over
- digital
Needs alongside it
- Power from a battery or supply rated for 300 mA if more than one stepper runs, not the board's 5 V pin. Join the grounds.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| IN1 | digital | ||
| IN2 | digital | ||
| IN3 | digital | ||
| IN4 | digital | ||
| + | 5 VDriver board power, 5 V. | ||
| - | ground |
Size and material
- Size
- 28 × 20 × 28 mm
- Weight
- 37 g
- Material
- metal
- Sold by the
- set
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.