Push-on/push-off latching button, 12 mm
A button that stays on after one press and turns off with the next.
Clicky self-latching switch: push once for on, again for off. Rated 50 V 0.5 A, so for logic-level power or as a mode toggle, not motors. 12 x 12 x 7 mm, pins 7 mm apart.
Electrical
- Supply voltage
- 0 to 50 V
- Current
- 0 mA typical, 500 mA max
- Talks over
- digital
Needs alongside it
- As a logic input, use INPUT_PULLUP with pin 2 to GND.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | digital, not connected | ||
| 2 | digital, ground, not connected |
Size and material
- Size
- 12 × 7 × 12 mm
- Weight
- 1.2 g
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.