Mini panel-mount SPDT toggle switch
A flip switch for turning the project on and off or choosing a mode.
ON-ON latching toggle with 3 solder terminals, fits a 6 mm hole. Select between two things (two voltages, two modes), or use as an on/off switch with COM and one side. 32.9 x 13.1 x 12 mm.
Electrical
- Supply voltage
- 0 to 30 V
- Talks over
- digital
Needs alongside it
- As a logic input, use INPUT_PULLUP with COM to GND.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | digital, not connectedSide terminal. | ||
| COM | digital, ground, not connectedMiddle terminal. | ||
| 2 | digital, not connectedOther side terminal. |
Size and material
- Size
- 12 × 33 × 13 mm
- Weight
- 5 g
- Material
- metal
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.