1.8" color TFT, 160x128 (ST7735R, SPI) + microSD
A small color screen that works with almost any board.
Classic 1.8" TFT breakout with microSD, 3.3 V 150 mA LDO and 3/5 V level shifting. Backlight about 50 mA at full brightness. 4-wire SPI.
Electrical
- Supply voltage
- 3.3 to 5.5 V
- Current
- 50 mA typical, 60 mA max
- Talks over
- spi, digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| Vcc | 3.3 V, 5 V | ||
| GND | ground | ||
| SCLK | SPI clock | ||
| MOSI | SPI MOSI | ||
| MISO | SPI MISOOnly needed for the microSD card. | ||
| TFT_CS | SPI select | ||
| Card_CS | SPI selectmicroSD chip select. | ||
| D/C | digital | ||
| RST | digital | ||
| Lite | PWMBacklight PWM. |
Size and material
- Size
- 34 × 7 × 56 mm
- Material
- screen
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.