10 kΩ NTC thermistor (B3950), epoxy bead on 457 mm leads
A tiny temperature probe on long wires, for tanks, pipes and enclosures.
Precision 10 kΩ at 25 °C NTC thermistor, β = 3950, -55 to 125 °C, 3.3 mm epoxy head on long insulated leads. Read as a divider with a 10 kΩ resistor; convert with the β equation.
Electrical
- Supply voltage
- 0 to 5.5 V
- Talks over
- analog
Needs alongside it
- Needs a fixed 10 kΩ resistor to form a voltage divider.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| 1 | 3.3 V, 5 VEither lead, to the supply. | ||
| 2 | analogTo an analog pin, with 10 kΩ from that pin to GND. |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.