Gravity turbidity sensor (water cloudiness)
Tells how cloudy water is, for pond, aquarium and filter monitoring.
DFRobot SEN0189: optical turbidity probe with an adapter board giving analog 0-4.5 V or a digital threshold output. 5 V, up to 40 mA. Only the probe tip goes in water. Adapter 38 x 28 x 10 mm.
Electrical
- Supply voltage
- 4.75 to 5.25 V
- Logic level
- 5 V
- Current
- 30 mA typical, 40 mA max
- Talks over
- analog, digital
Needs alongside it
- Output reaches 4.5 V: divide it down (e.g. 10k/20k) for a 3.3 V board.
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | 5 V | ||
| - | ground | ||
| A/D | analog, digital0-4.5 V analog (or digital, set by switch). |
Size and material
- Size
- 38 × 10 × 28 mm
- Weight
- 30 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.