US-100 ultrasonic distance sensor (UART or trigger/echo)
A bat-style distance sensor that works on 3.3 V boards and corrects for temperature.
2-450 cm ultrasonic ranger with temperature compensation. Jumper on: 9600-baud UART (also reports temperature). Jumper off: HC-SR04-style trigger/echo. 2.4-5.5 V, 2 mA; logic follows the supply.
Electrical
- Supply voltage
- 2.4 to 5.5 V
- Current
- 2 mA typical, 2 mA max
- Talks over
- digital, uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VCC | 3.3 V, 5 V | ||
| Trig/TX | digital, serial TXTrigger in, or UART TX in serial mode. | ||
| Echo/RX | digital, serial RXEcho out, or UART RX in serial mode. | ||
| GND | ground | ||
| GND2 | ground |
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.