USB-C Power Delivery trigger (HUSB238), 5-20 V
Lets a modern USB-C charger supply 9, 12 or 20 V for motors, valves and LED strips.
Asks a USB-C PD charger for 5, 9, 12, 15, 18 or 20 V (jumpers, or I2C at 0x08) at 1-3 A (up to 100 W with a capable charger and cable). Default 5 V 1 A. Output on V+/GND and a screw terminal. Lets a laptop-style charger power 12 V parts.
Electrical
- Supply voltage
- 5 to 20 V
- Talks over
- power, i2c
- I2C address
- 0x08
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| V+ | power inNegotiated output voltage (5-20 V). Check it before connecting the load. | ||
| GND | ground | ||
| SCL | I2C clockOptional. No pull-ups on board. | ||
| SDA | I2C dataOptional. No pull-ups on board. |
Size and material
- Size
- 25 × 5 × 20 mm
- Weight
- 2.2 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.