CP2102N USB-to-serial adapter (USB-C)
Connects a computer's USB port to a part's serial pins, for programming and debugging.
USB-C to UART bridge (Silicon Labs CP2102N, up to 3 Mbit/s) with an FTDI-style 6-pin header: GND, CTS, 5 V, TX, RX, RTS. 3.3 V signals that 5 V parts accept; auto-reset for Arduino uploads. For programming boards without USB and for debugging serial devices.
Electrical
- Supply voltage
- 4.75 to 5.25 V
- Talks over
- uart
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| GND | ground | ||
| CTS | digitalClear to send, in. | ||
| 5V | 5 V5 V from USB, out to the target. | ||
| TX | serial TXData out (3.3 V) to the target's RX. | ||
| RX | serial RXData in from the target's TX (5 V tolerant). | ||
| RTS | digitalAuto-reset line. |
Size and material
- Size
- 30 × 5 × 18 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.