VL53L0X laser time-of-flight distance sensor
A tiny laser that measures distance precisely, in a narrow beam.
ST VL53L0X invisible-laser ranger on an Adafruit breakout with regulator and level shifting. About 30-1200 mm (up to 2 m on white targets), 3-12 % accuracy. I2C at 0x29 (change in software; use XSHUT to run several). 2.6-5.5 V, about 19 mA while ranging.
Electrical
- Supply voltage
- 2.6 to 5.5 V
- Logic level
- 3.3 V
- Current
- 19 mA typical, 40 mA max
- Talks over
- i2c
- I2C address
- 0x29
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| 2v8 | not connected2.8 V regulator output. Leave unconnected. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| GPIO1 | digitalInterrupt output. | ||
| XSHUT | digitalPull LOW to shut down. Used to give several sensors different addresses. |
Size and material
- Size
- 21 × 3 × 18 mm
- Weight
- 1.3 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.