VNH5019 motor driver carrier, 12 A (Pololu)
A strong driver for one big motor, with speed, direction and current sensing.
High-current single H-bridge: 5.5-24 V, 12 A continuous, 30 A peak, PWM to 20 kHz, current-sense output (about 140 mV/A), reverse-voltage protection. INA/INB set direction, PWM sets speed. 38.1 x 27.9 x 7.6 mm, 6.5 g. For 25D/37D gearmotors, wipers and scooter motors.
- Draws high current. Designs using it get a safety review before we build them.
Electrical
- Supply voltage
- 2.5 to 24 V
- Current
- 12000 mA typical, 30000 mA max
- Talks over
- digital, pwm, analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | power inMotor supply 5.5-24 V (reverse protected). Fuse it. | ||
| VOUT | not connectedMotor supply after the protection MOSFET (output). | ||
| VDD | 3.3 V, 5 VLogic supply, 2.5-5.5 V. | ||
| GND | ground | ||
| OUTA | not connected | ||
| OUTB | not connected | ||
| PWM | PWM | ||
| INA | digital | ||
| INB | digital | ||
| ENA/DIAGA | digitalEnable / fault (pulled up). | ||
| ENB/DIAGB | digitalEnable / fault (pulled up). | ||
| CS | analogCurrent sense, about 140 mV per amp. | ||
| CS_DIS | digitalHIGH disables current sense. Usually unconnected. |
Size and material
- Size
- 38 × 8 × 28 mm
- Weight
- 6.5 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
Projects using it
No public project uses it yet. Design one that does.