Water level / leak sensor strip
Tells whether water is present and roughly how high it has risen, like a leak or tank alarm.
Exposed parallel traces with a transistor amplifier. Analog output rises as more of the 40 x 16 mm sensing area gets wet. 3-5 V, under 20 mA. Traces corrode if powered continuously: switch VCC from a pin and read briefly.
Electrical
- Supply voltage
- 3 to 5 V
- Current
- 10 mA typical, 20 mA max
- Talks over
- analog
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| S | analogSignal. Higher = more submerged. | ||
| + | 3.3 V, 5 V | ||
| - | ground |
Size and material
- Size
- 20 × 4 × 62 mm
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
Projects using it
No public project uses it yet. Design one that does.