MPU-6050 accelerometer + gyro (6-DoF)
Feels tilt, movement and spin, so a project can tell which way is up or how fast it turns.
InvenSense 3-axis accelerometer (±2-16 g) and 3-axis gyro (±250-2000 °/s) on an Adafruit breakout with regulator and level shifting. I2C at 0x68 (0x69 with AD0 high). 3.9 mA.
Electrical
- Supply voltage
- 3 to 5.5 V
- Logic level
- 3.3 V
- Current
- 3.9 mA typical, 4.1 mA max
- Talks over
- i2c
- I2C address
- 0x68, 0x69
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| VIN | 3.3 V, 5 V | ||
| 3Vo | 3.3 V3.3 V regulator output. Leave unconnected normally. | ||
| GND | ground | ||
| SCL | I2C clock | ||
| SDA | I2C data | ||
| INT | digitalInterrupt output (data ready / motion). | ||
| AD0 | digitalPull HIGH to move the address to 0x69. | ||
| XDA | not connectedAuxiliary I2C for an external magnetometer. Usually unused. | ||
| XCL | not connectedAuxiliary I2C clock. Usually unused. |
Size and material
- Size
- 26 × 5 × 18 mm
- Weight
- 1.8 g
- Material
- pcb
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W
