Active buzzer, 5 V
Makes a loud beep when switched on. Good for alarms and timers.
Self-oscillating piezo buzzer: apply 3-5 V DC and it beeps at about 2 kHz. No tone control. 12 mm diameter, 9.7 mm tall, pins 7.6 mm apart. Long leg is +.
Electrical
- Supply voltage
- 3 to 5.5 V
- Current
- 25 mA typical, 30 mA max
- Talks over
- digital
Pins
| Pin | Can do | Max V | Max mA |
|---|---|---|---|
| + | digitalLong leg, to a GPIO (or a transistor for full volume). | ||
| - | ground |
Size and material
- Size
- 12 × 10 × 12 mm
- Material
- plastic
- Sold by the
- piece
Works with
- Arduino Uno R3
- Arduino Nano
- Arduino Mega 2560 Rev3
- Arduino UNO R4 WiFi
- Arduino UNO R4 Minima
- Arduino Nano ESP32
- ESP32 DevKitC (ESP32-WROOM-32, 38-pin)
- ESP32-S3-DevKitC-1 (N8R8)
- Adafruit ESP32-S3 Feather (4 MB flash, 2 MB PSRAM)
- Seeed XIAO ESP32S3 Sense (camera + mic)
- Seeed XIAO ESP32C3
- Seeed XIAO ESP32C6
- Raspberry Pi Pico (RP2040)
- Raspberry Pi Pico W (RP2040, Wi-Fi)
- Raspberry Pi Pico 2 (RP2350)
- Raspberry Pi Pico 2 W (RP2350, Wi-Fi)
- Seeed XIAO RP2040
- Seeed XIAO nRF52840 (Bluetooth LE)
- Raspberry Pi 5 (4 GB)
- Raspberry Pi 4 Model B (4 GB)
- Raspberry Pi Zero 2 W



